Regulator

  • 0 out of 5

    0225 • 1/2”- 1” PRESSURE REDUCING VALVES WITH DIAPHRAGM PN 16 RIO EXPORT NICKEL-PLATED WITH STAINLESS STEEL SEAT AND FEMALE SLEEVES

    CONNECTIONS: FEMALE-FEMALE

    DESIGN
    Brass body dimensions 3/8”-1” EN12165-CW617N
    Cast brass body dimensions 1”1/4-2” EN1982-CB753S
    Brass bonnets EN 12165 – CW617N
    Other forged components in brass EN 12165 – CW617N
    Other components in turned brass EN 12164 – CW614N
    EPDM rubber diaphragm, nylon reinforced to 70 Sh
    O-ring washers and seat gaskets in NBR RUBBER
    SM GALVANIZED STEEL calibration spring – EN 10270-1
    Nickel plating ELECTRODEPOSITED COATING EN 12540 (Cu/Ni5s)
    STAINLESS STEEL insert seat EN 10088-1.4305 (AISI 303)

    Product codes 0225
    0225.015 female/female nickel-plated 1/2”
    0225.020 female/female nickel-plated 3/4”
    0225.025 female/female nickel-plated 1”

  • 0 out of 5

    0226 • 3/8”- 2” PRESSURE REDUCING VALVES WITH DIAPHRAGM PN 16 RIO EXPORT YELLOW WITH STAINLESS STEEL SEAT AND FEMALE SLEEVES

    CONNECTIONS: FEMALE-FEMALE

    DESIGN
    Brass body dimensions 3/8”-1” EN12165-CW617N
    Cast brass body dimensions 1”1/4-2” EN1982-CB753S
    Brass bonnets EN 12165 – CW617N
    Other forged components in brass EN 12165 – CW617N
    Other components in turned brass EN 12164 – CW614N
    EPDM rubber diaphragm, nylon reinforced to 70 Sh
    O-ring washers and seat gaskets in NBR RUBBER
    SM GALVANIZED STEEL calibration spring – EN 10270-1
    Nickel plating ELECTRODEPOSITED COATING EN 12540 (Cu/Ni5s)
    STAINLESS STEEL insert seat EN 10088-1.4305 (AISI 303)

    Product codes 0226
    0226.012 female/female yellow 3/8”
    0226.015 female/female yellow 1/2”
    0226.020 female/female yellow 3/4”
    0226.025 female/female yellow 1”
    0226.033 female/female yellow 1”1/4
    0226.042 female/female yellow 1”1/2
    0226.050 female/female yellow 2”

  • 0 out of 5

    0228 • 1/2”- 1” PRESSURE REDUCING VALVES WITH DIAPHRAGM PN 16 RIO EXPORT YELLOW WITH STAINLESS STEEL SEAT AND MALE DISMANTLING FITTINGS

    CONNECTIONS: DISMANTLING FITTINGS MALE
    DESIGN
    Brass body dimensions 3/8”-1” EN12165-CW617N
    Cast brass body dimensions 1”1/4-2” EN1982-CB753S
    Brass bonnets EN 12165 – CW617N
    Other forged components in brass EN 12165 – CW617N
    Other components in turned brass EN 12164 – CW614N
    EPDM rubber diaphragm, nylon reinforced to 70 Sh
    O-ring washers and seat gaskets in NBR RUBBER
    SM GALVANIZED STEEL calibration spring – EN 10270-1
    Nickel plating ELECTRODEPOSITED COATING EN 12540 (Cu/Ni5s)
    STAINLESS STEEL insert seat EN 10088-1.4305 (AISI 303)

    Product codes 0228
    0228.015 dismantling fittings male yellow 1/2”
    0228.020 dismantling fittings male yellow 3/4”
    0228.025 dismantling fittings male yellow 1”

  • 0 out of 5

    0485 • 1/2” SECURITY VALVES with PRESET PRESSURE WITH DIAPHRAGM AND HANDWHEEL ACTIVATION

    “LIGHT” MODEL CE- 1115 IN COMPLIANCE WITH DIRECTIVE PED 97/23/EC
    CONNECTIONS: MALE-FEMALE
    DESIGN
    Brass Body EN 12165 – CW617N
    Head valve in PA66-GF30 polyamide (nylon 66) reinforced with glass fiber
    Handwheel in PA66 polyamide (nylon)
    Diaphragm in 70 Sh preshaped EPDM rubber (peroxide cured)
    Sm GALVANIZED STEEL spring – EN 10270-1

    Product codes 0228
    0485.130 Setting 3 bar 1/2” M/F
    0485.140 Setting 4 bar 1/2” M/F
    0485.150 Setting 5 bar 1/2” M/F
    0485.160 Setting 6 bar 1/2” M/F
    0485.170 Setting 7 bar 1/2” M/F
    0485.180 Setting 8 bar 1/2” M/F

  • 0 out of 5

    0487 • 1/2” SECURITY VALVES with PRESET PRESSURE WITH DIAPHRAGM AND HANDWHEEL ACTIVATION (Copy)

    “LIGHT” MODEL CE- 1115 IN COMPLIANCE WITH DIRECTIVE PED 97/23/EC
    CONNECTIONS: FEMALE-FEMALE
    DESIGN
    Brass Body EN 12165 – CW617N
    Head valve in PA66-GF30 polyamide (nylon 66) reinforced with glass fiber
    Handwheel in PA66 polyamide (nylon)
    Diaphragm in 70 Sh preshaped EPDM rubber (peroxide cured)
    Sm GALVANIZED STEEL spring – EN 10270-1

    Product codes 0228
    0487.130 Setting 3 bar 1/2” F/F
    0487.140 Setting 4 bar 1/2” F/F
    0487.150 Setting 5 bar 1/2” F/F
    0487.160 Setting 6 bar 1/2” F/F
    0487.170 Setting 7 bar 1/2” F/F
    0487.180 Setting 8 bar 1/2” F/F

  • 0 out of 5

    2333 – PILOT OPERATED PRESSURE REDUCING REGULATOR

    The Type 2333 pilot operated universal pressure reducing regulator is a large size regulators (6″ -16″) designed to work in all general industrial applications. A pressure reducing valve is used for controlling the downstream pressure (p2) to an adjusted set point. The design of a pressure reducing regulator valve is to close when the downstream pressure rises above a set value.

    Set Point Range: 30 to 400psi (2 to 28bar)

    Size: 6″ to 16″

    ANSI Class: 125 to 300

    Temperature Range: Upto 660oF (350oC)

  • 0 out of 5

    2335 – PILOT OPERATED EXCESS PRESSURE REGULATOR

    The Type 2335 pilot operated universal pressure reducing regulator is a large size regulators (6″ -16″) designed to work in all general industrial applications. An excess pressure valve is used to control the upstream pressure (p1) to an adjusted set point. The design of an excess pressure regulator valve is to open when the upstream pressure rises above the set value.

    Set Point Range: 30 to 400psi (2 to 28bar)

    Size: 6″ to 16″

    ANSI Class: 125 to 300

    Temperature Range: Upto 660oF (350oC)

  • 0 out of 5

    2405 – PRESSURE REDUCING REGULATOR (FLANGED)

    The Type 2405 self-operated pressure reducing regulator is used to control the pressure of flammable gases used as a source of energy, e.g. in boilers, driers, vaporizers, heat exchangers or industrial furnaces. Alternatively, it can control the compressed air supply in process engineering applications.

    An additional application of the regulator is the pressure control of inert gas used for inerting or blanketing reaction or storage tanks to protect the product in the tank from oxidation, explosion or escaping. To achieve an economical consumption of the inert gas, its pressure must be controlled to always remain slightly higher than atmospheric pressure while the tank is being filled or emptied. A pressure reducing valve is used for controlling the downstream pressure (p2) to an adjusted set point. The design of a pressure reducing regulator valve is to close when the downstream pressure rises above a set value. These valves are self-operated in that the downstream pressure being controlled is tapped downstream of the valve and transmitted via a control line to the operating diaphragm of the Type 2405 where it is converted into a positioning force.

    Set Point Range: 0.075 to 150psi (0.005 to 10bar)

    Size: 1/2″ to 2″

    ANSI Class: 125 to 300

    Temperature Range: -5 to 300oF (-20 to 150oC)

  • 0 out of 5

    2406 – EXCESS PRESSURE REGULATOR (FLANGED)

    The Type 2406 self-operated excess pressure regulator is used to control the pressure of flammable gases used as a source of energy, e.g. in boilers, driers, vaporizers, heat exchangers or industrial furnaces. Alternatively, it can control the compressed air supply in process engineering applications.

    An additional application of the regulator is the pressure control of inert gas used for inerting or blanketing reaction or storage tanks to protect the product in the tank from oxidation, explosion or escaping. To achieve an economical consumption of the inert gas, its pressure must be controlled to always remain slightly higher than atmospheric pressure while the tank is being filled or emptied.

    An excess pressure valve is used to control the upstream pressure (p1) to an adjusted set point. The design of an excess pressure regulator valve is to open when the upstream pressure rises above the set value.

    These valves are self-operated in that the upstream pressure being controlled is tapped upstream of the valve and transmitted via a control line to the operating diaphragm of the Type 2406 where it is converted into a positioning force.

    Set Point Range: 0.075 to 150psi (0.005 to 10bar)

    Size: 1/2″ to 2″

    ANSI Class: 125 to 300

    Temperature Range: -5 to 300oF (-20 to 150oC)

  • 0 out of 5

    2407* – PRESSURE REDUCING REGULATOR (THREADED END)

    The Type 2407 self-operated pressure reducing regulators are used to control the pressure of flammable gases used as a source of energy, e.g. in boilers, driers, vaporizers, heat exchangers or industrial furnaces. Alternatively, it can control the compressed air supply in process engineering applications.

    * PLEASE NOTE THIS ITEM HAS BEEN DISCONTINUED AND REPLACED BY MODEL 2405

    Set Point Range: 0.075 to 15psi (0.005 to 1bar)

    Size: 1/2″ to 1″

    ANSI Class: 300

    Temperature Range: -5 to 300oF (-20 to 150oC)

  • 0 out of 5

    2408* – EXCESS PRESSURE REGULATOR (THREADED END)

    The Type 2408 self-operated excess pressure regulator are used to control the pressure of flammable gases used as a source of energy, e.g. in boilers, driers, vaporizers, heat exchangers or industrial furnaces. Alternatively, it can control the compressed air supply in process engineering applications.

    * PLEASE NOTE THIS ITEM HAS BEEN DISCONTINUED AND REPLACED BY MODEL 2406

    Set Point Range: 0.075 to 15psi (0.005 to 1bar)

    Size: 1/2″ to 1″

    ANSI Class: 300

    Temperature Range: -5 to 300oF (-20 to 150oC)

  • 0 out of 5

    2422/2424 – LARGE PRESSURE REDUCING REGULATOR

    The Type 2424/2424 self-operated universal pressure reducing regulator is a large size regulator (6″ -10″) designed to work in all general industrial applications. A pressure reducing valve is used for controlling the downstream pressure (p2) to an adjusted set point. The design of a pressure reducing regulator valve is to close when the downstream pressure rises above a set value. These valves are self-operated in that the downstream pressure being controlled is tapped downstream of the valve and transmitted via a control line to the operating diaphragm of the Type 2424/2424 where it is converted into a positioning force.

    Set Point Range: 0.75 to 35psi (0.05 to 2.5bar)

    Size: 6″ to 10″

    ANSI Class: 125 to 300

    Temperature Range: Upto 660oF (350oC)